BRAIDED HOSE AND FITTINGS

untitled-1.jpg

Advocult Motorsport's range of braided hoses are the perfect solution for any fluid/air transfer application. With a large range of fittings and hoses, from nitrile core, to PTFE/TEFLON, and nylon or Stainless steel outer braid, our braided hose products can help you build better.

  • DESIGN ENGINEERING GOLD HEAT SHEILD

    DESIGN ENGINEERING GOLD HEAT SHEILD

    Heat Shroud GOLD™ solves the problem of heat and abrasions causing failure of lines, hoses and wires without the need to disconnect them. High temperature Metalized Polyimide lamination, bonded to a robust 20oz heat treated glass fiber base...
    £61.06 - £99.41
    Choose Options
  • LOW PROFILE SWIVELING BANJO FITTINGS LOW PROFILE SWIVELING BANJO FITTINGS

    LOW PROFILE SWIVELING BANJO FITTINGS

    These banjo fittings have the ability to rotate 360 degrees, even after installation. They are an excellent option for 90-degree connections and are very low profile. Suitable for use in high pressure fuel and oil systems. Do not exceed 400 psi. ...
    £34.95
    Choose Options
  • TUBE BENDER TUBE BENDER

    TUBE BENDER

    This manual tube bender is perfect for forming our Stainless steel hard line, It comes with clear bend angle markings to make it easier when forming accurate bends.
    £28.50
    Add to Cart
  • DESIGN ENGINEERING BLACK FIRE SLEEVE

    DESIGN ENGINEERING BLACK FIRE SLEEVE

    Fire Sleeve solves the problem of heat and abrasions damaging fuel, transmission and brake lines and is a fireproof solution. Constructed from a high temperature resistant braided glass material, woven into a sleeve and heavily coated with 100% iron...
    £23.45 - £43.65
    Choose Options
  • AN MALE Y-ADAPTOR

    AN MALE Y-ADAPTOR

    Advocult Motorsport's aluminium adaptors feature lightweight 6061 T6 billet aluminium construction with a corrosion resistant double andodised finish.
    £19.79
    Choose Options
  • AN16 STAINLESS WELD-ON BUNG AN16 STAINLESS WELD-ON BUNG

    AN16 STAINLESS WELD-ON BUNG

    This fittings is made from 316/L stainless steel, and it is perfect for finishing the end of our 35mm coolant tube system. Adding this fittings to the end of your tube allows you to use AN16 braided hoses to connect to your radiator/engine.
    £18.99
    Add to Cart
  • AN MALE TO FEMALE QUICK-DISCONNECT ADAPTOR

    AN MALE TO FEMALE QUICK-DISCONNECT ADAPTOR

    Advocult Motorsport's aluminium adaptors feature lightweight 6061 T6 billet aluminium construction with a corrosion resistant double andodised finish.   This Quick release adaptor has 2 internal fluoropolymer o-rings, the release clip is made...
    £15.66
    Choose Options
  • COMPLETE METRIC BANJO TO AN MALE STEEL BOLT COMPLETE METRIC BANJO TO AN MALE STEEL BOLT

    COMPLETE METRIC BANJO TO AN MALE STEEL BOLT

    Advocult Motorsport's aluminium adaptors feature lightweight 6061 T6 billet aluminium construction with a corrosion resistant double andodised finish. This banjo combination comes with a steel banjo bolt, designed for higher pressure situations...
    £15.15 - £20.89
    Choose Options
  • 3-PORT MAC VALVE MOUNTING BRACKET 3-PORT MAC VALVE MOUNTING BRACKET

    3-PORT MAC VALVE MOUNTING BRACKET

    ADVOCULT MOTORSPORT's 3-Way MAC valve mounting bracket is made with 3D printing technology.It is designed to be a cost effective and ergonomic solution, to an issue that is often unthought-of.This product is supplied in a 2-piece design, complete with a...
    £15.00
    Add to Cart
  • SWIVEL 180-DEGREE ELBOW (PTFE/TEFLON) AN4-AN10 SWIVEL 180-DEGREE ELBOW (PTFE/TEFLON) AN4-AN10

    SWIVEL 180-DEGREE ELBOW (PTFE/TEFLON) AN4-AN10

    Advocult motorsports PTFE hose fittings are great for applications such as brake, clutch, power steering, hydraulic systems, nitrous, or for the use of any fuels. Swivel head for easy angle adjustment. The PTFE lining provides maximum protection and...
    £13.78 - £18.96
    Choose Options
  • COMPLETE METRIC BANJO TO AN MALE COMPLETE METRIC BANJO TO AN MALE

    COMPLETE METRIC BANJO TO AN MALE

    Advocult Motorsport's aluminium adaptors feature lightweight 6061 T6 billet aluminium construction with a corrosion resistant double andodised finish.   Our complete metric banjo to AN male adaptors are sent with 2 copper washers.
    £13.51 - £16.21
    Choose Options
  • SWIVEL 120-DEGREE ELBOW (PTFE/TEFLON) AN4-AN10 SWIVEL 120-DEGREE ELBOW (PTFE/TEFLON) AN4-AN10

    SWIVEL 120-DEGREE ELBOW (PTFE/TEFLON) AN4-AN10

    Advocult motorsports PTFE hose fittings are great for applications such as brake, clutch, power steering, hydraulic systems, nitrous, or for the use of any fuels. Swivel head for easy angle adjustment. The PTFE lining provides maximum protection and...
    £13.50 - £18.38
    Choose Options
  • SWIVEL 45-DEGREE ELBOW (PTFE/TEFLON) AN3-AN10 SWIVEL 45-DEGREE ELBOW (PTFE/TEFLON) AN3-AN10

    SWIVEL 45-DEGREE ELBOW (PTFE/TEFLON) AN3-AN10

    Advocult motorsports PTFE hose fittings are great for applications such as brake, clutch, power steering, hydraulic systems, nitrous, or for the use of any fuels. Swivel head for easy angle adjustment. The PTFE lining provides maximum protection and...
    £13.21 - £18.38
    Choose Options
  • SWIVEL 90-DEGREE ELBOW (PTFE/TEFLON) AN3-AN10 SWIVEL 90-DEGREE ELBOW (PTFE/TEFLON) AN3-AN10

    SWIVEL 90-DEGREE ELBOW (PTFE/TEFLON) AN3-AN10

    Advocult motorsports PTFE hose fittings are great for applications such as brake, clutch, power steering, hydraulic systems, nitrous, or for the use of any fuels. Swivel head for easy angle adjustment. The PTFE lining provides maximum protection and...
    £13.21 - £18.38
    Choose Options
  • SWIVEL 180-DEGREE ELBOW (NITRILE) AN6-16 SWIVEL 180-DEGREE ELBOW (NITRILE) AN6-16

    SWIVEL 180-DEGREE ELBOW (NITRILE) AN6-16

    Advocult Motorsport's nitrile series hose ends feature lightweight 6061 T6 billet aluminium construction with a corrosion resistant double andodised finish. The mandrel bent tubing provides maximum fluid flow and the compression style design means...
    £12.63 - £18.38
    Choose Options
  • SWIVEL 120-DEGREE ELBOW (NITRILE) AN6-16 SWIVEL 120-DEGREE ELBOW (NITRILE) AN6-16

    SWIVEL 120-DEGREE ELBOW (NITRILE) AN6-16

    Advocult Motorsport's nitrile series hose ends feature lightweight 6061 T6 billet aluminium construction with a corrosion resistant double andodised finish. The mandrel bent tubing provides maximum fluid flow and the compression style design means...
    £12.07 - £19.99
    Choose Options
  • SWIVEL 90-DEGREE ELBOW (NITRILE) AN6-16 SWIVEL 90-DEGREE ELBOW (NITRILE) AN6-16

    SWIVEL 90-DEGREE ELBOW (NITRILE) AN6-16

    Advocult Motorsport's nitrile series hose ends feature lightweight 6061 T6 billet aluminium construction with a corrosion resistant double andodised finish. The mandrel bent tubing provides maximum fluid flow and the compression style design means...
    £11.48 - £29.32
    Choose Options
  • SWIVEL 45-DEGREE ELBOW (NITRILE) AN6-16 SWIVEL 45-DEGREE ELBOW (NITRILE) AN6-16

    SWIVEL 45-DEGREE ELBOW (NITRILE) AN6-16

    Advocult Motorsport's nitrile series hose ends feature lightweight 6061 T6 billet aluminium construction with a corrosion resistant double andodised finish. The mandrel bent tubing provides maximum fluid flow and the compression style design means...
    £11.48 - £28.40
    Choose Options
  • 120-DEGREE SWIVEL ELBOW (PUSH-ON HOSE) AN6-AN8

    120-DEGREE SWIVEL ELBOW (PUSH-ON HOSE) AN6-AN8

    Advocult Motorsport's push on series hose ends feature lightweight 6061 T6 billet aluminium construction with a corrosion resistant double andodised finish. The mandrel bent tubing provides maximum fluid flow and the compression style design means...
    £10.56 - £14.64
    Choose Options
  • STAINLESS STEEL HARD VACUUM LINE STAINLESS STEEL HARD VACUUM LINE

    STAINLESS STEEL HARD VACUUM LINE

    Tired of melting vacuum lines to your wastegate? Our stainless steel tube is the perfect solution for this when combined with our range of compression fittings. It is made from 316 stainless steel and goes through a full annealing process, meaning it...
    £10.49
    Add to Cart
  • METRIC TO AN BANJO ADAPTOR

    METRIC TO AN BANJO ADAPTOR

    Advocult Motorsport's aluminium adaptors feature lightweight 6061 T6 billet aluminium construction with a corrosion resistant double andodised finish.   Our banjo adaptors are designed to be used with 2 copper washers and our Banjo bolts as...
    £9.54 - £12.24
    Choose Options
  • 90-DEGREE SWIVEL ELBOW (PUSH-ON HOSE) AN6-AN10

    90-DEGREE SWIVEL ELBOW (PUSH-ON HOSE) AN6-AN10

    Advocult Motorsport's push on series hose ends feature lightweight 6061 T6 billet aluminium construction with a corrosion resistant double andodised finish. The mandrel bent tubing provides maximum fluid flow and the compression style design means...
    £9.46 - £14.41
    Choose Options
  • 45-DEGREE SWIVEL ELBOW (PUSH-ON HOSE) AN6-AN10

    45-DEGREE SWIVEL ELBOW (PUSH-ON HOSE) AN6-AN10

    Advocult Motorsport's push on series hose ends feature lightweight 6061 T6 billet aluminium construction with a corrosion resistant double andodised finish. The mandrel bent tubing provides maximum fluid flow and the compression style design means...
    £9.46 - £14.08
    Choose Options
  • FUEL CELL FITTING

    FUEL CELL FITTING

    Advocult Motorsport's aluminium adaptors feature lightweight 6061 T6 billet aluminium construction with a corrosion resistant double andodised finish.
    £7.52 - £8.88
    Choose Options
  • SWIVEL STRAIGHT HOSE END (PTFE/TEFLON) AN3-AN10 SWIVEL STRAIGHT HOSE END (PTFE/TEFLON) AN3-AN10

    SWIVEL STRAIGHT HOSE END (PTFE/TEFLON) AN3-AN10

    Advocult motorsports PTFE hose fittings are great for applications such as brake, clutch, power steering, hydraulic systems, nitrous, or for the use of any fuels. Swivel head for easy angle adjustment. The PTFE lining provides maximum protection and...
    £7.47 - £9.77
    Choose Options
  • STAINLESS STEEL HARD LINE STAINLESS STEEL HARD LINE

    STAINLESS STEEL HARD LINE

    Our stainless steel tube is perfect for replacing OEM hard fuel lines underneath the chassis, or anywhere else on the vehicle. It is made from 316 stainless steel and goes through a full annealing process, meaning it won't deform ur crush when being bent...
    £7.42 - £9.89
    Choose Options
  • SWIVEL STRAIGHT HOSE END (NITRILE) AN6-16 SWIVEL STRAIGHT HOSE END (NITRILE) AN6-16

    SWIVEL STRAIGHT HOSE END (NITRILE) AN6-16

    Advocult Motorsport's nitrile series hose ends feature lightweight 6061 T6 billet aluminium construction with a corrosion resistant double andodised finish. The mandrel bent tubing provides maximum fluid flow and the compression style design means...
    £6.31 - £19.39
    Choose Options