Pro Tuner "Knock Ears" Kit Dual Channel 2014 Spec

INCLUDES: - Includes 2 sensors

1AWG Terminated Cable Pair (6m)

LENGTH: 6m SUITS: NEXUS R5 INCLUDES: 1 x 1 AWG battery cable (Red) pre-terminated with SurLok connector. 6m. 1 x 1 AWG battery cable (Black) pre-terminated with SurLok connector. 6m.

1AWG Terminated Cable Pair (4m)

LENGTH: 4m SUITS: NEXUS R5 INCLUDES: 1 x 1 AWG battery cable (Red) pre-terminated with SurLok connector. 4m. 1 x 1 AWG battery cable (Black) pre-terminated with SurLok connector. 4m.

Dual Crimper Set Inc 3 Pin Removal Tools

Plug and Pin Set for NEXUS R5

SUITS: NEXUS R5 INCLUDES: 1 x AMP 34 Position Connector Key1 1 x AMP 26 Position Connector Key1 1 x AMP 34 Position Connector Key2 1 x AMP 26 Position Connector Key3 1 x DTP 4 Position Deutsch Connector and Wedge 125 x Pins suit AMP Superseal Connectors...

1AWG Terminated Cable Pair (2m)

LENGTH: 2m SUITS: NEXUS R5 INCLUDES: 1 x 1 AWG battery cable (Red) pre-terminated with SurLok connector. 2m. 1 x 1 AWG battery cable (Black) pre-terminated with SurLok connector. 2m.

NEXUS R5 Tube Mount Kit - 1.25"

DIAMETER: 1.25" SUITS: NEXUS R5 VCU INCLUDES: 1 x Mounting Plate, 2 x 1.25" Tube Clamps NOTES: Brackets are made from CNC machined 6061 Aluminium and then annodized for a durable black finish.

NEXUS R5 Tube Mount Kit - 1.625"

DIAMETER: 1.625" SUITS: NEXUS R5 VCU INCLUDES: 1 x Mounting Plate, 2 x 1.625" Tube Clamps NOTES: Brackets are made from CNC machined 6061 Aluminium and then annodized for a durable black finish.

Haltech HC5 - Hydraulic Crimper

SUITS: 00 AWG to 12AWG cable. INCLUDES: 1 x Hydraulic crimping tool. Rated to 5 Ton. 8 x Die Sets - (Sizes 4,6,10,16,25,35,50,70mm2) 1 x Hydraulic Rebuild Kit 1 x Moulded Carry Case 1 x Quick Start Guide

Wire Pack - Basic 4 Cylinder

LENGTH: 2.5m (8') INCLUDES: 42 Haltech colour-coded wires including 4 x Injectors, 4 x Ignition, 2 x Shielded 4-core (Trigger and Home), MAP, TPS, Air & Coolant temp, AVI-2, DPO 1 - 4, Shielded DPI-1/SPI-1, Shielded AVI-6 O2 input, Fuel pump trigger,...

Plug and Pins Only - AMP 26 & 34 Pin 4 Row 3 Keyway Superseal Connector Set

SUITS: E8/11, PS1000/2000 and Elite 1000-2500 ECUs.

Knock Sensor Suits 2014 Pro Tuner "Knock Ears" Kit

6 Circuit Haltech Fuse Box with Lid

INCLUDES: Matching pin set. NOTES: Does not include relays or fuses.

Plug and Pins Only - 32 Pin Tyco

SUITS: Sprint 500 & RE ECU Platinum Interceptor (non-waterproof version) INCLUDES: Pack of 32 Pins.

SurLok Connector Set (Black + Red)

SUITS: NEXUS R5 INCLUDES: 1 x 200A Red SurLok Connector 1 x 200A Black SurLok Connector

Plug and Pins Only - AMP 26 Pin 2 Row Superseal Connector

SUITS: HT-020032 - HPI4 - High Power Igniter HT-020036 - HPI6 - High Power Igniter HT-020040 - HPI8 - High Power Igniter

Plug and Pins Only - AMP 34 Pin 4 Row 3 Keyway Superseal Connector

SUITS: Elite 550/750/950 ECUs, Haltech IQ3 Street Dashes and the large connector on E8/11, PS1000/2000 and Elite 1000-2500 ECUs.

Crimping Tool Suits DTP Series Solid Contacts

SUITS: DTP Series Solid Contacts and Cable sizes 2.05mm2 to 3.3mm2 INCLUDES: 1 x DTP Crimping Tool NOTES: Use with Solid Barrel Contacts

Crimping Tool Suits DTM Series Solid Contacts

SUITS: DTM Series Solid Contacts and Cable sizes 0.515mm2 to 0.81mm2 INCLUDES: 1 x DTM Crimper NOTES: Use with Solid Barrel Contacts

Waterproof Elite USB Extension Cable Type B for communication - LENGTH: 2.4m (8')

LENGTH: 2.4m (8') SUITS: Elite ECUs (excluding Elite Pro Plug-in) INCLUDES: Water proof cap.

Plug and Pins Only - 24 Pin Tyco

SUITS: IO12 Expander Box WBC1, & WBC2 Controller Device Emulator 8 INCLUDES: Pack of 24 Pins.

Solid State Relay 100 AMP

SUITS: High frequency PWM control of auxiliary injectors, variable speed fan or pump control etc. INCLUDES: 1K Pull up resistor. Note: Inductive loads must have diode suppression.

Crimping Tool Suits DT Series Solid Contacts

SUITS: Suits DT Series Solid Contacts and Cable sizes 0.5mm2 to 1.5mm2 INCLUDES: 1 x DT Crimping Tool NOTES: Use with Solid Barrel Contacts

Haltech Elite Pro Plug-in DTM4 CAN to OBDII CAN Cable

LENGTH: 0.8M / 2.6Ft SUITS: Elite PRO Plug-in ECU - Ford Falcon i6 "Barra" INCLUDES: 1 x Re-Programming Cable only NOTES: Use for Reprogramming Radio on Ford FG MK1 Vehicles

Waterproof (Type B) USB Extension Cable for Elite Pro Plug-in ECU / IC-7 - LENGTH: 400mm (16")

LENGTH: 400mm (16") SUITS: Elite PRO Direct Plug-in ECUs, IC-7 Display Dash INCLUDES: Circular mini right angle connector to USB type B communications cable. NOTES: As supplied with Ford Falcon Elite PRO Direct Plug-in ECUs and IC-7 Display Dash

Manual Cable Lug Crimping Tool

SUITS: 1,2,4,6,8 AWG cable INCLUDES: 1 x Manual cable lug crimping tool NOTES: Used to crimp large terminals and SurLok connectors on 1,2,4,6,8 AWG cable

Harness Sleeve Pack

INCLUDES: Nylon Sleeve 6mm x 10m 8mm x 5m 14mm x 2m 25mm x 1m Heatshrink glue lined 8mm x 1.2m 12mm x 0.6m 19mm x 0.3m 35mm x 0.12m Cable ties Small (100mm) x 20 Medium (200mm) x 10 Fleece Tape 1 x Roll NOTES: Protect your cables and give your harness...

Plug and Pins Only - 16 Pin Tyco 16 Pin Tyco

SUITS: Platinum PRO Plug-in Auxillary I/O Platinum Sport GM Plug-in Auxillary I/O TCA 2 & TCA 4 Elite 750 Plug 'n' Play Adaptor Harness Auxillary I/O INCLUDES: Pack of 16 Pins.    

Plug and Pins Only - Matching Set of Deutsch DTM-6 Connectors (7.5 Amp)

INCLUDES: Male Plug, Female Receptacle/Socket, Wedgelocks, Seals, Male & Female Pins.

1 AWG Battery Cable (Black)

LENGTH: Sold per meter. INCLUDES: 1 AWG battery cable black. Made to order in 1m increments. 1m minimum required length. NOTES: Made to order

1 AWG Battery Cable (Red)

LENGTH: Sold per meter. INCLUDES: 1 AWG battery cable red. Made to order in 1m increments. 1m minimum required length. NOTES: Made to order

Wi-Fi Antenna Glass Mount 2.4Ghz

THREAD: RP-SMA SUITS: NEXUS R5 INCLUDES: 1 x Glass Mount Wi-Fi Antenna. 1.5m lead. NOTES: For increasing signal strength when standard Wi-Fi antenna is shielded by the placement of the ECU.

USB Connection Cable

SUITS: Platinum Sprint, Sport, Pro and Elite range of ECU's INCLUDES: USB A to USB B Cable - 2 meters - USB 2.0 Compliant NOTES: Custom Haltech branded cable - Yellow

Plug and Pins Only - Matching Set of Deutsch DTP-4 Connectors (25 Amp)

INCLUDES: DTP 4P Kit 1 x DTP04-4P including wedge 1 x DTP06-4S including wedge 4 x 12/14AWG Female Pins 4 x 12/14AWG Male Pins 1 x Printed Insert - Artwork supplied by Haltech, Printed A4 folded to A5.

Plug and Pins Only - Matching Set of Deutsch DTM-4 Connectors (7.5 Amp)

INCLUDES: Male Plug, Female Receptacle/Socket, Wedgelocks, Seals, Male & Female Pins.

Plug and Pins Only - Bosch 7 Pin Junior Timer Female Connector

SUITS: HT-020002 - Dual Channel OEM Igniter HT-020004 - Triple Channel OEM Igniter INCLUDES: Pack of 7 Pins.

Plug and Pins Only - Factory Toyota 2JZ Crank/Cam

INCLUDES: Pack of 2 Pins.

Plug and Pins Only - Factory Toyota 2JZ ign coil

INCLUDES: Pack of 2 Pins.

Plug and Pins Only - 12 Pin Tyco

SUITS: DRA Digital Reluctor Adaptor. INCLUDES: Pack of 12 Pins.

Plug and Pins Only - Bosch Oil / Temperature Sensor

SUITS: HT-010920 - Bosch Fluid Pressure and Temperature Sensor INCLUDES: 1 X 5 Pin Plug, 5 x Pins, 5 x Seals