FUEL CELLS

  • FCST, Fuel Cell Surge Tank FCST, Fuel Cell Surge Tank

    RADIUM ENGINEERING FCST, FUEL CELL SURGE TANK

    Click here to download installation instructions (PDF) For installation on older 20-049X-XX FCST versions, click HERE.For installation on older 20-014X-XX FCST versions, click HERE. BACKGROUNDSince 2010, external Radium Engineering fuel surge...
    £699.95 - £1,389.95
    Choose Options
  • RA SERIES FUEL CELL RA SERIES FUEL CELL

    RADIUM ENGINEERING RA SERIES FUEL CELL

    OVERVIEWA competition grade fuel cell provides maximum performance and safety for high performance vehicles. RA-series fuel cells are designed and manufactured by Radium Engineering to meet top safety requirements set forth by the worldwide safety...
    £719.95 - £879.95
    Choose Options
  • Fuel Cell Weld-In Cages Fuel Cell Weld-In Cages

    FUEL CELL WELD-IN CAGES

    A weld-in cage will ease fuel cell installation by offering a pre-made, safe and secure, robust cradle. The cage is made with 1" x 1" x 1/16" STAINLESS STEEL tube. They are TIG welded by hand and are polished. And because they are not mild carbon steel,...
    £509.95 - £549.95
    Choose Options
  • Replacement Fuel Cell Cans

    RADIUM ENGINEERING REPLACEMENT FUEL CELL CANS

    This is a replacement for the aluminum can that protects the internal fuel bladder. Compatible with Radium RA-series fuel cells. Each replacement fuel cell can contains the following:-Black Powder Coated Aluminum Lid-Black Powder Coated Aluminum...
    £379.95 - £459.95
    Choose Options
  • QUICK-FILL DUMP CANS

    QUICK-FILL DUMP CANS

    Dump cans are used in motorsports when quick fuel filling pit stops are essential. The main difference between a "dump can" and a common "fuel jug" is the vent architecture. For quick filling, air entering the can must replace the exiting fuel at the...
    £299.95
    Add to Cart
  • DRY-BREAK REMOTE MOUNT FUEL FILLER - 1.5IN VENTED

    DRY-BREAK REMOTE MOUNT FUEL FILLER - 1.5IN VENTED

    20-0504-V Dry Break, 1.5in, Female, Remote Mount, Vented The 20-0504-V Dry Break, 1.5in, Female, Remote Mount, Vented typically secures to the vehicle body. The vented fuel cap has roll-over protection if the vehicle ever becomes inverted. The fill neck...
    £249.95
    Add to Cart
  • FUEL CELL REFUELLING KITS FUEL CELL REFUELLING KITS

    FUEL CELL REFUELLING KITS

    These refueling kits are designed specifically for the Radium Engineering FCST. The FCST does not come standard with any of the parts in these kits. As described below, the Radium Engineering refueling kits come in a few different varieties.  ...
    £149.95 - £884.95
    Choose Options
  • REMOTE MOUNT FILL NECK, 24AN ELBOW - 1.5IN BARB REMOTE MOUNT FILL NECK, 24AN ELBOW - 1.5IN BARB

    REMOTE MOUNT FILL NECK, 24AN ELBOW - 1.5IN BARB

    20-0547 Remote Mount Fill Neck, 24AN Elbow, 1.5in Barb The 20-0547 Remote Mount Fill Neck is primarily used with a body-mounted remote filler (see 20-0505-V). The -24AN fill neck mates to a 24AN hose end capable of 360 degree rotation. It features a 75...
    £139.95
    Add to Cart
  • REMOTE MOUNT FUEL FILLER - 1.5IN VENTED

    REMOTE MOUNT FUEL FILLER - 1.5IN VENTED

    Click here to download installation instructions (PDF) What is a remote mounted fuel filler? A remote mounted fuel filler is NOT located directly on the fuel tank or fuel cell, but rather somewhere else on the vehicle, such as the fender. See this blog...
    £139.95
    Add to Cart
  • 20-0197-V Direct Mount Fill Neck and Cap

    DIRECT MOUNT FILL NECK AND CAP

    20-0197-V Direct Mount Fill Neck and Cap The 20-0197-V Direct Mount Fill Neck and Cap is perfect for filling directly into the fuel cell, as shown. This kit uses the 20-0148-V Fill Neck Cap (included) so filling is quick and simple.Included:-Machined and...
    £104.95
    Add to Cart
  • FUEL CELL WELD FLANGE, RAW ALUM W/ GASKET

    FUEL CELL WELD FLANGE, RAW ALUM W/ GASKET

    Fuel cell 6x10 inch, 24-bolt weld flange. CNC machined from 6061 billet aluminum and flycut to 0.24" thickness. Includes gasket.Ideal for weldeing to aluminum tank. Welding must be done by an experienced welder who can prevent warping of the flange.Holes...
    £89.95
    Add to Cart
  • FUEL FILL NECK HOSE KIT - 2.25 IN

    FUEL FILL NECK HOSE KIT - 2.25 IN

    This wire reinforced hose is designed specifically for fuel filling. Internal hose diameters are available in 1.5" and 2.25" making it ideal for many applications. The hose is used to connect to a body-mounted filler.Unlike silicone fuel fill hose, this...
    £89.95
    Add to Cart
  • FUEL FILL NECK HOSE KIT - 1.5 IN

    FUEL FILL NECK HOSE KIT - 1.5 IN

    This wire reinforced hose is designed specifically for fuel filling. Internal hose diameters are available in 1.5" and 2.25" making it ideal for many applications. The hose is used to connect to a body-mounted filler.Unlike silicone fuel fill hose, this...
    £89.95
    Add to Cart
  • REMOTE MOUNT FILL NECK, STRAIGHT - 1.5IN BARB

    REMOTE MOUNT FILL NECK, STRAIGHT - 1.5IN BARB

    20-0527 Remote Mount Fill Neck, Straight, 1.5in Barb The 20-0527 Remote Mount Fill Neck, Straight, 1.5in Barb is multi-functional and is primarily used with a body-mounted remote filler (not included). The fill neck has a machined hose barb connection...
    £79.95
    Add to Cart
  • RADIUM ENGINEERING FUEL CELL VENT KIT - 12AN

    RADIUM ENGINEERING FUEL CELL VENT KIT - 12AN

    20-0484-12 Fuel Cell Vent Kit, 12ANThis high flow kit is typically used for quick-fill systems that commonly use a dry break and dump can. It includes an air filter, 3/4" fuel vent hose, and adapter fittings. The kit requires a 12AN male vent fitting...
    £59.96
    Add to Cart
  • Fuel Cell Vent Kit, 8AN

    RADIUM ENGINEERING FUEL CELL VENT KIT - 8AN

    The vent permits air to escape as the fuel cell is filled and permits filtered air to enter when fuel is getting consumed. This allows the tank to breath to avoid pressurization during normal operation. 20-0484-08 Fuel Cell Vent Kit, 8ANThis kit is...
    £59.96
    Add to Cart
  • Radium Engineering DIY Fuel Pump Wiring Kit

    Radium Engineering DIY Fuel Pump Wiring Kit

    This Do-It-Yourself wiring kit includes the necessary parts to construct a power wiring harness for one fuel pump. It uses the highest quality components to ensure proper operation in all conditions. The relay and fuse holder are sealed to allow...
    £59.95
    Add to Cart
  • Fuel Cell Nut Ring, Black Anodized

    FUEL CELL NUT RING - BLACK ANODIZED

    This nut ring is manufactured from 6061 aluminum and is anodized to permit all fuel types and to prevent corrosion. All threaded holes are tapped for 1/4"-28 using the industry standard 6x10 pattern. It was designed to bolt into Radium RA-series fuel...
    £59.95
    Add to Cart
  • 20-0535 DSV, 12AN ORB TO 12AN MALE, QUICK FILL, INTERNAL

    QUICK FILL DSV

    Radium Engineering Dynamic Safety Vent (DSV) valves feature advanced tank venting and roll-over protection for fuel cells and gas tanks. The Radium Engineering DSV valves come in different varieties for all fill type applications; standard fill...
    £59.95
    Add to Cart
  • STANDARD FILL DSV

    STANDARD FILL DSV

    Radium Engineering Dynamic Safety Vent (DSV) valves feature advanced tank venting and roll-over protection for fuel cells and gas tanks. The Radium Engineering DSV valves come in different varieties for all fill type applications; standard fill...
    £49.95
    Add to Cart
  • FUEL CELL FOAM

    FUEL CELL FOAM

    Mandated by the FiA, fuel cell foam is used both as an explosion suppressant as well as baffling. This reticulated foam is manufactured from polyurethane and meets MIL-DTL-83054C Type-II. At 15 pores per inch (nominal), it displaces only 0.07...
    £39.95
    Add to Cart
  • FILLER NECK BLOCK-OFF PLATE

    FILLER NECK BLOCK-OFF PLATE

    20-0360 Filler Block-OffThis kit blocks off the filler hole on the Radium FCST units.Included:-Machined and Anodized Aluminum Blank Plate-FKM Viton Gasket Flange Seal-Nylon Sealing Washers-Stainless Steel Hardware  
    £34.95
    Add to Cart
  • Fuel Cell Gasket, 6x10, 24-Bolt

    FUEL CELL GASKET, 6x10, 24-BOLT

    18-0015Radium Engineering gasket for "industry standard" 6x10 inch (24-bolt) fuel cells. Unlike others constructed from cork or paper, this seal is die cut from a premium quality variation of FKM Viton. The Radium gasket is 1/16" thick and reuseable...
    £29.95
    Add to Cart
  • FUEL CELL MOUNTING TAB KIT

    FUEL CELL MOUNTING TAB KIT

    This kit can be used for fuel cells that use a 24-bolt (6x10) fill plate including FuelSafe, ATL, Jaz, Harmon, Pyrotect, etc. NOTE: Only compatible with the older Radium Engineering FCSTs (20-014X-XX and 20-049X-XX).Depending on the amount of fill...
    £29.95
    Add to Cart
  • GASKET, 6-BOLT FILL NECK - 2.18" BC

    GASKET, 6-BOLT FILL NECK - 2.18" BC

    18-0019 Gasket, 6-Bolt Fill Neck, 2.18" BCThis gasket is used for Radium fuel cell fill necks. The 1/16" thick material is a premium quality variation of FKM Viton. It uses 6 equally-spaced holes with a 2.18" bolt center.
    £9.95
    Add to Cart
  • Fuel Level Senders for Radium Cells Fuel Level Senders for Radium Cells

    FUEL LEVEL SENDERS FOR RADIUM CELLS

    Click here to download installation instructions (PDF) This fuel level sensor uses the standard SAE 5-bolt mounting pattern, extensively used with the Radium Fuel Cell Surge Tank.Full stainless steel sealed construction with magnetic float...
    £9.95 - £179.80
    Choose Options
  • FUEL CELL FITTING

    FUEL CELL FITTING

    Advocult Motorsport's aluminium adaptors feature lightweight 6061 T6 billet aluminium construction with a corrosion resistant double andodised finish.
    £7.52 - £8.88
    Choose Options