"Red" Single Channel Hall Effect Sensor - THREAD: M12x1.0

THREAD: M12x1.0 SUITS: Wheel Speed, Crank/Cam etc. INCLUDES: Matching set of Deutsch DTM 3 connectors (HT-031014)

1 AWG Battery Cable (Black)

LENGTH: Sold per meter. INCLUDES: 1 AWG battery cable black. Made to order in 1m increments. 1m minimum required length. NOTES: Made to order

1 AWG Battery Cable (Red)

LENGTH: Sold per meter. INCLUDES: 1 AWG battery cable red. Made to order in 1m increments. 1m minimum required length. NOTES: Made to order

1 Bar GM MAP Sensor

INCLUDES: Matching plug and 3 pins.

1/4" Mild Steel Weld-On Base Only

1/4" Mild Steel Weld-On Kit

INCLUDES: Nut and Ferrule NOTES: Compression ferrules are single use and must be replaced when replacing probes.

1/4" Nut and Brass Ferrule Only

NOTES: Compression ferrules are single use and must be replaced when replacing probes.

1/4" Open Tip Thermocouple - LENGTH: 0.61m (24")

LENGTH: 0.61m (24") SUITS: NA or Forced induction applications. Used with a Requires a TCA 2 or 4 thermocouple amplifier. INCLUDES: Mini K Type connector. NOTES: Does not include any fitting hardware...

1/4" Open Tip Thermocouple - LENGTH: 0.84m (33")

LENGTH: 0.84m (33") SUITS: NA or Forced induction applications. Used with a Requires a TCA 2 or 4 thermocouple amplifier. INCLUDES: Mini K Type connector. NOTES: Does not include any fitting hardware...

1/4" Open Tip Thermocouple - LENGTH: 0.95m (37.5")

LENGTH: 0.95m (37.5") SUITS: NA or Forced induction applications. Used with a Requires a TCA 2 or 4 thermocouple amplifier. INCLUDES: Mini K Type connector. NOTES: Does not include any fitting...

1/4" Open Tip Thermocouple 0.72m (28.5") - LENGTH: 0.72m (28.5")

LENGTH: 0.72m (28.5") SUITS: NA or Forced induction applications. Used with a Requires a TCA 2 or 4 thermocouple amplifier. INCLUDES: Mini K Type connector. NOTES: Does not include any fitting...

1/4" Stainless Compression Fitting Kit

THREAD: 1/8 NPT INCLUDES: Nut and Ferrule NOTES: Compression ferrules are single use and must be replaced when replacing probes.

1/4" Stainless Steel Weld-On Base Only

1/4" Stainless Steel Weld-On Kit

INCLUDES: Nut and Ferrule NOTES: Compression ferrules are single use and must be replaced when replacing probes.

12 Position Rotary Trim Module (Boost/Fuel/Ign etc)

INCLUDES: 2 position decals and matching set of Deutsch DTM 3 connectors (HT-031014)

150 PSI "TI" Fuel/Oil/Wastegate Pressure Sensor

THREAD: 1/8 NPT INCLUDES: Matching Delphi plug and 3 pins, -4 AN adaptor. NOTES: "TI" Pressure sensors must not be mounted directly into the fuel rail or engine block, they must be remote mounted and...

150 PSI Motorsport Fuel/Oil/Wastegate Pressure Sensor (Stainless Steel Diaphragm)

THREAD: 1/8 NPT INCLUDES: Matching Delphi plug and 3 pins. NOTES: Motorsport Pressure sensors must not be mounted directly into the fuel rail or engine block, they must be remote mounted and...

1AWG Terminated Cable Pair (2m)

LENGTH: 2m SUITS: NEXUS R5 INCLUDES: 1 x 1 AWG battery cable (Red) pre-terminated with SurLok connector. 2m. 1 x 1 AWG battery cable (Black) pre-terminated with SurLok connector. 2m.

1AWG Terminated Cable Pair (4m)

LENGTH: 4m SUITS: NEXUS R5 INCLUDES: 1 x 1 AWG battery cable (Red) pre-terminated with SurLok connector. 4m. 1 x 1 AWG battery cable (Black) pre-terminated with SurLok connector. 4m.

1AWG Terminated Cable Pair (6m)

LENGTH: 6m SUITS: NEXUS R5 INCLUDES: 1 x 1 AWG battery cable (Red) pre-terminated with SurLok connector. 6m. 1 x 1 AWG battery cable (Black) pre-terminated with SurLok connector. 6m.

2000 PSI Brake/Nitrous Pressure Sensor

THREAD: 1/8 NPT INCLUDES: Matching Delphi plug and 3 pins.   Please take care when wiring this sensor as incorrect wiring will damage this sensor! All Honeywell Pressure sensors are...

250 PSI "TI" Fuel/Oil/Wastegate Pressure Sensor

THREAD: 1/8 NPT INCLUDES: Matching plug and pins, -4 AN adaptor. NOTES: "TI" Pressure sensors must not be mounted directly into the fuel rail or engine block, they must be remote mounted and...

250 PSI Motorsport Fuel/Oil/Wastegate Pressure Sensor (Stainless Steel Diaphragm)

THREAD: 1/8 NPT INCLUDES: Matching Delphi plug and 3 pins. NOTES: Motorsport Pressure sensors must not be mounted directly into the fuel rail or engine block, they must be remote mounted and...

3 Bar GM MAP Sensor

INCLUDES: Matching plug and 3 pins.

3 Bar Motorsport MAP Sensor

INCLUDES: Matching male Deutsch DTM-3 Connector (HT-031001)

4 Bar Motorsport MAP Sensor

INCLUDES: Matching male Deutsch DTM-3 Connector (HT-031001)

5 Bar "TI" MAP Sensor - THREAD: 1/8 NPT

THREAD: 1/8 NPT INCLUDES: Matching Delphi plug and 3 pins, -4 AN & 5mm hosetail adaptors. NOTES: "TI" MAP sensors must not be mounted directly to the inlet manifold, they must be remote mounted...

5 Bar Motorsport MAP Sensor (Stainless Steel Diaphragm)

THREAD: 1/8 NPT INCLUDES: Matching Delphi plug and 3 pins. NOTES: Motorsport MAP sensors must not be mounted directly to the inlet manifold, they must be remote mounted and connected via a flexible...

500 PSI "TI" Pressure Sensor

THREAD: 1/8 NPT INCLUDES: Matching plug and pins, -4 AN adaptor. NOTES: "TI" Pressure sensors must not be mounted directly into the fuel rail or engine block, they must be remote mounted and...

6 Circuit Haltech Fuse Box with Lid

INCLUDES: Matching pin set. NOTES: Does not include relays or fuses.

7 Bar "TI" MAP Sensor

THREAD: 1/8 NPT INCLUDES: Matching plug and pins, -4 AN & 5mm hosetail adaptors. NOTES: "TI" MAP sensors must not be mounted directly to the inlet manifold, they must be remote mounted and...

Adaptor - Brass 1/8" NPTF to 3/8" NPTF

LENGTH: 20mm SUITS: 1/8" NPT Sensors INCLUDES: Adaptor Only NOTES: Tightening Torque: 1.5 - 3 TPFT (Turns past finger tight)

Air Temp Sensor - Large Thread - THREAD: 3/8 NPT 18TPI

THREAD: 3/8 NPT 18TPI INCLUDES: Matching Delphi plug and pins. NOTES: 127 deg C (260 F) Max reading.

Air Temp Sensor - Small Thread - Thread: M14 x 1.5

THREAD: M14 x 1.5 INCLUDES: Matching Delphi plug and pins. NOTES: 127 deg C (260 F) Max reading.

Air Temp Sensor - THREAD: 1/4 NPT

THREAD: 1/4 NPT SUITS: Nissan Z32 300ZX intake. INCLUDES: Matching Delphi plug and pins. NOTES: 127 deg C (260 F) Max reading.

Air Temp Sensor - THREAD: 1/8 NPT

THREAD: 1/8 NPT INCLUDES: Matching male Deutsch DTM-2 Connector (HT-031000) NOTES: 127 deg C (260 F) Max reading.

Analogue Output Adaptor

OUTPUTS: Converts a PWM Output to 0-5v Analogue Signal. SUITS: e.g for use with Evo 10 AWD controller. INCLUDES: HT-031016 - Matching Set of Deutsch DTM 4 Connectors.

Auxiliary Connector Harness Upgrade Kit for Elite PRO Plug-in ECUs

LENGTH: 2.5m (8') INCLUDES: 18 Colour-coded wires 2.5m (8') pre-crimped with pins to suit AMP Superseal Connectors    

Boost Control Solenoid 3 Port 33Hz - Thread: 1/8 NPT

THREAD: 1/8 NPT INCLUDES: Hose fittings, rubber isolated mount and matching Set of Deutsch DTM 2 Connectors (HT-031012)

Bosch 150 PSI Fluid Pressure and Temperature Sensor

THREAD: M10 x 1.0 INCLUDES: Includes: Matching plug and pins, M10 x 1.0 to 1/8NPT adaptor. NOTES: Used to measure fluid pressure and temperature Pressure Range 0-150 PSI Temperature Range -40 to 140...