LINK B LOOM LONG - #5LB

5 m long 'B' loom to suit G4, G4+ and G4X ECUsPerfect for all custom wiring jobs utilising Link WireIn ECUs. The ‘B’ Loom has a Link ‘B’ ECU connector at one end and unterminated wires at the other. All wires are colour coded to...

LINK A LOOM LONG - #5LA

5 m long 'A' loom to suit G4, G4+ and G4X ECUsPerfect for all custom wiring jobs utilising Link WireIn ECUs. The ‘A’ Loom has a Link ‘A’ ECU connector at one end and unterminated wires at the other. All wires are colour coded to...

LINK A LOOM MEDIUM - #2LA

2.5 m long 'A' loom to suit G4, G4+ and G4X ECUsPerfect for all custom wiring jobs utilising Link WireIn ECUs. The ‘A’ Loom has a Link ‘A’ ECU connector at one end and unterminated wires at the other. All wires are colour coded to...

LINK B LOOM MEDIUM - #2LB

2.5 m long 'B' loom to suit G4, G4+ and G4X ECUsPerfect for all custom wiring jobs utilising Link WireIn ECUs. The ‘B’ Loom has a Link ‘B’ ECU connector at one end and unterminated wires at the other. All wires are colour coded to...

LINK LOOM CRIMPING TOOL (CTS)

Crimping Tool for terminals to suit AMP Superseal connectors. To suit terminals used in A, B, C and D loom connectors. 

LINK B LOOM SHORT - #0LB

0.4m long 'B' loom to suit G4, G4+ and G4X Wire-In ECUsPerfect for all custom wiring jobs utilising Link WireIn ECUs. The ‘B’ Loom has a Link ‘B’ ECU connector at one end and unterminated wires at the other. All wires are colour...

LINK A LOOM SHORT - #0LA

0.4m long 'A' loom to suit G4, G4+ and G4X Wire-In ECUsPerfect for all custom wiring jobs utilising Link WireIn ECUs. The ‘A’ Loom has a Link ‘A’ ECU connector at one end and unterminated wires at the other. All wires are colour...

LINK CABLE (CANDASH)

Link CAN Connector to flying leads. Can be used for custom applications – Please contact our tech support to check compatibility/suitability. 

LINK TUNING CABLE (CANSER)

Link CAN to Serial (DB9 Female connector) Tuning Cable. Used to connect ECU to a computer with a serial interface (DB9 Male). A USB tuning cable is also available. Compatible with:  Link G4X Storm  Link G4X and G4+ Fury  Link G4X and...

LINK TUNING CABLE (CUSB)

Link CAN to USB Tuning Cable. Used to connect the ECU to a computer via USB. A CAN to Serial cable is also available. Compatible with:  Link G4X Storm  Link G4X and G4+ Fury  Link G4X and G4+ Xtreme Link G4+ Thunder  All Link...

LINK DUAL CORE CABLE - #C2C10

Dual core screen cable for use with trigger signals and knock sensors - 10m per pack  

LINK XS EXPANSION LOOM - #XSL

Want to add additional inputs/output to your Link Plugin ECU? Use the XS Loom. The Link XS Loom plugs into the expansion connector on all Link G4, G4+ and G4X plug-in ECUs. The number of extra inputs and outputs added by the XS Loom is dependent on the...

LINK PIN KIT D - #TKD

Housing and 26 terminals for D connector. Plug and Pin kit only.Suitable for: G4+ Thunder

LINK Pin Kit C - #TKC

Housing and 26 terminals for C connector. Plug and Pin Kit Only.Suitable for:  G4+ Thunder Obsolete G4 Atom and Lightning. (Not G4+ or G4X Atom)

LINK Pin Kit B - #TKB

Equivalent plug and connectors as "B" Loom. Plug and Pin Kit only.Suitable for: Link G4X Storm (Loom A/Pin Kit A also required) Link G4X and G4+ Fury (Loom A/Pin Kit A also required) Link G4X, G4+ and G4 Xtreme (Loom A/Pin Kit A also required) Link G4+...

LINK PIN KIT A - #TKA

Equivalent plug and connectors as "A" Loom. Plug and Pin Kit only.Suitable for:  All Link G4X WireIn ECU’s (Note: Loom B/Pin Kit B will also be required for the Storm/Fury/Xtreme) Link G4+ Atom (NB: Does NOT suit the earlier G4 Atom models. I...

LINK CABLE (CANPCB)

Required to add CAN/Serial communications to G4+/G4X Plugin ECU’s. Plugs directly into ECU PCB header. Use the Link CANF connector (purchased separately) to connect. 

LINK CABLE (CANJST4)

Required to add CAN communications & power to recently released G4X Plugin ECU’s which have the new 4 Pin powered CAN connector (not the older 5pin CAN connector).  Plugs directly into the socket on the ECU PCB, provides CAN and a...

LINK CABLE (USBM)

USB Mini Cable. Used to connect ECU to computer for tuning. Suitable for: G4X Atom G4X Monsoon G4+ Atom G4+ Kurofune G4+ Monsoon

LINK PLUG (CANF)

Required to add CAN/Serial communications to G4+/G4X Plugin ECU’s. Plugs directly into ECU PCB header. Use the Link CANF connector (purchased separately) to connect.

LINK DEUTSCH 2-WAY PLUG KIT - #PKD2F

Deutsch 2-Way Plug Kit