SENSORS

  • LINK CAN LAMBDA

    LINK CAN LAMBDA

    Link’s CAN Lambda is an easy to use CAN module that provides digital wideband sensor control via CAN bus and is compatible with leading aftermarket ECUs.  If using the CAN Lambda with a G4+/G4X PlugIn ECU use a Link CANPCB cable to...
    £340.80
    Add to Cart
  • LINK 6.5 BAR MAP SENSOR (MAP6.5)

    LINK 6.5 BAR MAP SENSOR (MAP6.5)

    The Link 6.5 Bar MAP sensor reads up to 6.5 Bar absolute pressure. This means that it is suitable for turbo or supercharged applications running up to 5.5 Bar (or 87psi) of boost pressure.  Includes Plug and Pins Mount via weld on bung, tapped hole...
    £276.00
    Add to Cart
  • LINK 5 BAR MAP SENSOR (MAP5)

    LINK 5 BAR MAP SENSOR (MAP5)

    The Link 5 Bar MAP sensor reads up to 5 Bar absolute pressure. This means that it is suitable for turbo or supercharged applications running up to 4.0 Bar (or 58psi) of boost pressure.   Includes Plug and Pins Mount via weld on bund, tapped...
    £264.00
    Add to Cart
  • LINK ETHANOL CONTENT SENSOR - #ECS LINK ETHANOL CONTENT SENSOR - #ECS

    LINK ETHANOL CONTENT SENSOR - #ECS

    Looking to run flex-fuel? Then the Ethanol Content Sensor is a must have. The Ethanol Content Sensor measures the ratio of ethanol to petrol in a flex fuel vehicle. This sensor also measures fuel temperature. Compatible with all current Link Wire-In and...
    £223.20
    Add to Cart
  • LINK PRESSURE SENSOR (PS150) LINK PRESSURE SENSOR (PS150)

    LINK PRESSURE SENSOR (PS150)

    Oil or Fuel pressure 10 Bar/150psi 1/8” NPT Thread Includes plug and pin kit Technical Specs and WiringUp to 150 PSI above atmospheric pressure, cannot be used to read vacuum0.5v = 0bar / 0PsiG4.5v = 10 Bar / 145.03PsiG
    £184.80
    Add to Cart
  • LINK WIDEBAND O2 SENSOR (LSU49)

    LINK WIDEBAND O2 SENSOR (LSU49)

    This sensor can be used with all wide band controllers and ECU’s that support LSU 4.9 sensors. This includes:     Link G4+/G4X Fury and G4+Thunder ECU’s – These have on-board LSU4.9 wide-band control.  Link CAN-Lambda...
    £184.80
    Add to Cart
  • LINK THROTTLE POSITION SENSOR (TPSCW/CCW)

    LINK THROTTLE POSITION SENSOR (TPSCW/CCW)

    Throttle Position Sensor. Supports clockwise and counter-clockwise installations. 6 wire flying lead. Wiring instructions are provided in the box.Features  8 mm D-Shaft Rotary Sensor Hall Effect non-contact technology Long life - extremely...
    £168.00
    Add to Cart
  • LINK 140 BAR PRESSURE SENSOR

    LINK 140 BAR PRESSURE SENSOR

    High Pressure sensor for Liquid. Use for Fuel, Clutch, Brake etc. 140 Bar/2030PSI 45degree cone seat M10x1 Thread Includes mating connector kit Technical Specs:Up to 2030 PSI above atmospheric pressure, cannot be used to read vacuum.
    £144.00
    Add to Cart
  • LINK COMBINED PRESSURE AND TEMPERATURE SENSOR

    LINK COMBINED PRESSURE AND TEMPERATURE SENSOR

    Two sensors in one - Combined 10 bar (145 psi) Liquid Pressure sensor and -40 to 140 deg C L Liquid Temperature sensor. Suitable for Oil, Coolant, Fuel, Transmission fluid etc. Up to 10.0 bar (145PSI/1000kpa) Pressure Sensor for Liquid -40 to 140°C...
    £126.00
    Add to Cart
  • LINK CRANK ANGLE SENSOR (CAS) LINK CRANK ANGLE SENSOR (CAS)

    LINK CRANK ANGLE SENSOR (CAS)

    Used in conjunction with a trigger wheel to measure crank angle, a vital measurement for engine operation. Can be used with almost any steel trigger wheel, see related products for our trigger wheel options.Features  Variable reluctance (reluctor)...
    £124.80
    Add to Cart
  • LINK 4 BAR MAP SENSOR (MAP4)

    LINK 4 BAR MAP SENSOR (MAP4)

    The Link 4 Bar MAP sensor reads up to 4 Bar absolute pressure. This means that it is suitable for turbo or supercharged applications running up to 3.0 Bar (or 44psi) of boost pressure. The wiring pinout for this sensor is marked directly on the sensor...
    £117.60
    Add to Cart
  • LINK EXHAUST GAS TEMPERATURE PROBE

    LINK EXHAUST GAS TEMPERATURE PROBE

    Extreme Duty Fast Response EGT Temperature Probe   Type K thermocouple probe Exposed sensing junction for fastest response Includes 316 SS adjustable compression fitting Stainless steel protected wires Designed for extreme engine test &...
    £117.60
    Add to Cart
  • LINK 3 BAR MAP SENSOR (MAP3)

    LINK 3 BAR MAP SENSOR (MAP3)

    This Link MAP sensor reads up to 3 Bar absolute pressure. This means that it is suitable for turbo or supercharged applications running up to 2.0 Bar (or 29psi) of boost pressure. The wiring pinout for this sensor is indicated on the sensor.  ...
    £109.20
    Add to Cart
  • LINK 2.5 BAR MAP SENSOR (MAP2.5)

    LINK 2.5 BAR MAP SENSOR (MAP2.5)

    The Link 2.5 Bar MAP sensor reads up to 2.5 Bar absolute pressure. This means that it is suitable for turbo or supercharged applications running up to 1.5 Bar (approx 22psi) of boost pressure. The wiring pinout for this sensor is marked directly on the...
    £105.60
    Add to Cart
  • LINK 1.15 BAR MAP SENSOR (MAP1.15)

    LINK 1.15 BAR MAP SENSOR (MAP1.15)

    The Link 1.15 Bar MAP sensor reads up to 1.15 Bar absolute pressure. This means it is suitable for use in naturally aspirated engines. This MAP sensor can also be used in applications where positive intake pressures of up to 0.15 Bar (approx 2 PSI) are...
    £102.00
    Add to Cart
  • LINK MOUNTING BOSS (IAT1-8MA)

    LINK MOUNTING BOSS (IAT1-8MA)

    Weld-in Aluminium boss, 1/8" BSP Thread. Suitable for mounting Intake air temperature (IAT1-8), Coolant Temperature sensors (NTC1-8) and other sensors that use 1/8" BSP Thread.
    £19.20
    Add to Cart